5 people bought this in 48 hours
Zinc alloy Large J-shaped Double Hook (H)71.5mm (W)28mm
Product details
Product information
This double robe hook from B&Q is ideal for general purpose use.
- Only fixings included
Features and benefits
- Suitable for Internal use
Specifications
| Height (mm) | 71.5mm |
|---|---|
| Location | Internal |
| Material | Zinc alloy |
| Mounting type | Wall-mounted |
| Product shape | J-shaped |
| Width (mm) | 28mm |
| Product code | 05251766 |
Manufacturer / EU responsible person
Reviews
3.25 / 5(4 reviews)DSCO - 5 / 5 - 09/11/2023
Definitely not Hookie
I bought five of these in satin finish. All were perfectly made and each one was fitted to new oak doors (pilot holes first). Used shorter screws than those supplied and all have stayed put without loosening at all.
Susiesoo3 - 5 / 5 - 06/01/2021
great double door hook
had these in my last house and now in this house - on the bedroom, bathroom and kitchen doors. help tidy the room in no time, handy for dressing gowns, coats, kitchen aprons etc
AliObs - 1 / 5 - 15/11/2020
Not fit for purpose
A 5 minute job has taken 40mins to grind down the bracket so that it fits correctly! B&Q need to remove this product from sale as it’s not fit for purpose and most people who probably don’t have the tools we do could not have got it to fit!! Rubbish!
PhillV - 2 / 5 - 16/06/2020
Good appearance let down by poor manufacture
I bought this recently and normally I would have taken it back but lockdown made that just too much of an effort. It comes in 2 parts, the hook itself and a concealed bracket to which it is attached by an allen screw. The issue was that the bracket did not fit in flush to the hook. Consequently I had to remove the bracket from where I had fitted it on a door and found the bracket could not seat correctly as the internal cavity at the back of the hook was poorly finished off. After trying different approaches I found the remedy was to fit the bracket into the hook, hit the bracket with a hammer (hard!) which scored the inside of the hook recess, thus showing where it fouled and then grinding the internal corners (which was where the issue was) until it eventually fitted flush. I had to repeat the process numerous times and was glad I had a craft tiny grinder to do the job. Now it is fitted it looks good but I would suggest there is a lack of quality control and to anyone purchasing it in the future may I suggest you check the bracket sits flush in the hook housing before leaving B&Q.