Valspar Trade Interior Wall & ceiling Matt Primer & undercoat, 1L

Product information

Apply this primer & undercoat from the Valspar Trade range to interior & exterior surfaces using a brush, roller or spray, to prepare the surface for painting. It takes 1 hour to dry and will cover 10 m² per litre on average.

• Washable
• Suitable for Embossed wall coverings & plaster
• Surface Preparation - For indoor use only. Do not apply in damp or humid conditions. Apply when the temperature of the surface being painted is above 10°C. Remove old, loose or flaky paint and repair all damaged areas before painting. Lightly sand existing paint and wipe down with a damp cloth to remove dust. The surface must be clean, dry and free of dust and grease.
• Instructions for Use - Stir well before use to ensure paint is thoroughly mixed. Purchase enough paint to complete the job. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, avoiding excessive rolling or brushing, working from dry areas into the paint’s wet edge. Extra coats may be required when making dramatic colour changes. Dries to touch in about 1 hour under normal conditions. Allow 2-4 hours between coats.

Features and benefits

• Excellent Opacity
• High opacity and covering power
• Strong adhesion
• Reliable build and obliteration
• No splatter
• Dry to touch in 1 hour
• This product has a Valspar Love Your Colour Guarantee
• We want you to be satisfied with your colour selection. Not all monitors will display colours the same and paint tins may not show the same colour as your walls do in natural light. We therefore recommend you order a tester pot online or pop in store to pick one up, so you are sure that this is the right colour for you.
• We’re unable to offer refunds or to exchange products that have been mixed to your individual requirements. If the product you purchase is faulty, or not as described, we may offer an exchange, refund or repair as appropriate. This does not affect your legal rights.