Valspar Colour mixing Satin Wood varnish
Discontinued
Unfortunately, we no longer stock this item
Product details
Product information
This colour mixing varnish from Valspar can be applied to interior using a brush. The varnish takes 1 hours to dry and will cover 10m² per litre on average.
Features and benefits
- Colour and varnish in one step
- Long-lasting protection while enhancing the wood grain
Legal information
- Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. May cause respiratory irritation. EU: (cat A/e): 130 g/l (2010). This product contains a maximum VOC content of 100 g/l.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | Valspar |
|---|---|
| Colour | Colour mixing |
| Coverage | 10m² |
| Location | Interior |
| Drying time | 1 h |
| Recoat time | 2-4 hours |
| Finish | Satin |
| VOC level | Low |
| Base | Water-based |
| Application method | Brush |
| Product code | 5055018136659 |
Reviews
3 / 5(1 reviews)Paris05 - 3 / 5 - 24/04/2018
Not the colour I thought
I’ve been working on a chair project for quite some time. Valspar is the paint of my choice. On this occasion however the colour doesn’t match the chart. It says deep sunflower, but the colour looks definitely green tinged, in fact almost luminous. The other valspar colours have been really rich and had a super hard finish, this has not covered very well and I’m so disappointed.