UniBond Specialty Rubber Clear Adhesive 30g

Product information

Speciality adhesive for rubber

• Surfaces must be close fitting, clean, dry and free from dust, grease or paint. Apply a thin, even coat of adhesive to both surfaces, especially at the edges, using a serrated spreader or clean, short bristled brush. Ensure the entire surface to be bonded is covered. For best results, apply adhesive at a temperature of 18°C to 25°C. Replace the cap immediately. Allow the adhesive to dry for approximately 15 minutes until touch dry. Carefully align the parts and press together. Apply firm pressure for a few seconds from the centre of the bonded area outwards. Bonding will be instant and not repositionable, provided full strength within 24 hours

Features and benefits

• Store tube in blistercard in cool and dry condition