UniBond Leather Translucent Glue 30ml
Sold & shipped by B&Q
£5.70£190 per kg 
Under 18 years
Under 18 yearsProduct details
Product information
Speciality adhesive for leather
- Surfaces must be clean, dry and close fitting. Unscrew the cap and apply a thin, even coat of adhesive to both surfaces, especially at the edges, using a serrater spreader or clean, short bristled brush. For best results, apply the adhesive at a temperature of 18°C to 25°C. Replace the cap immediately. Allow the adhesive to dry for 5-10 minutes until touch dry. Carefully align parts and press together. Apply firm pressure for a few seconds from the centre of the bonded area outwards. Bonding will be instant and not repositionable, provided full strength within 24 hours
Features and benefits
- It bonds leather to many materials
- Replace cap immediately. Store tube in blistercard in cool and dry conditions
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Specifications
| Colour | Translucent |
|---|---|
| Container type | Tube |
| Drying time | 24 h |
| Location | Interior & exterior |
| Minimum application temperature | 18°C |
| Sandable | Non-sandable |
| Solvent-free | Solvent-free |
| Volume | 30ml |
| Product code | 5010383318215 |