UniBond Perfect finish Light brown Floor Sealant, 300ml
Product details
Product information
This acrylic floor sealant from UniBond is great for a range of sealing jobs. Simply apply and leave for 48hours to dry.
- Suitable for Wood
- Completely remove any existing sealant and residues. Thoroughly clean the joint to remove contaminants and allow to dry. Cut off the tip of the cartridge above the screw thread. Remove nozzle cap and trim nozzle diagonally to fit the joint width. Screw the nozzle onto the cartridge. Insert cartridge into a cartridge gun. Pull trigger to apply sealant into the joint. Ensure sealant has good contact with both sides of the joint. Smooth sealant with a sealant finishing tool within 5 minutes. Remove excess sealant immediately using water.
- Comes with Nozzle included
Features and benefits
- Specially formulated for wooden surfaces subject to vibration such as stairs and door frames
- Can be painted when dry and remains permanently flexible
- Easy to smooth
Legal information
- Contains preservative(s): Isothiazolinone mixture 3:1 (CIT/MIT). May produce an allergic reaction.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | UniBond |
|---|---|
| Colour | Light Brown |
| Paintable | Paintable |
| Solvent-free | Solvent-free |
| Standard | EN 15651-1 F-EXT-INT |
| Volume | 300ml |
| Product code | 5010383316839 |
Reviews
1 / 5(2 reviews)WinchDIY - 1 / 5 - 28/09/2021
Colour inaccurate: not as described on the tube
Can't comment on finish and resilience as not retained for more than a few hours. I was hoping for a colour that matched light oak flooring, but this is very pale, with a salmon tint which makes it look more like food (taramasalata + egg mayo?) than any form of wood. Possibly suitable for pale beech flooring, anything darker and this will just stand out in sharp contrast, bringing undue attention to itself.
Galleslave - 1 / 5 - 17/12/2020
Wrong colour.
This sealer isn't Light brown, looks pink in colour. The picture I've uploaded doesant really show how pink it realy looks. It's all going to be removed.