Pale yellow 2-part adhesive 32g of 6

Product information

Two part ultra strong epoxy adhesive.

• Suitable for Ceramic, chipboard, glass, metal, masonry, plastic & wood
• Make sure surfaces are dry, clean and free from dust, dirt and grease. Dispense equal volumes of resin and hardener onto a clean disposable surface or the tray provided. Stir well for 45 seconds with the plastic spatula provided, ensuring a thorough mix. Use within 2 hours. Apply the mixed adhesive to both surfaces of the joint and assemble carefully (a layer of adhesive 0.10 to 0.20 mm thick will normally impart the greatest lap shear strength to the joint). Keep the joint supported until set (using clamps or tape etc.) For approx. 6hrs minutes. Allow 16hrs before rough handling/machining. For a perfect finish carefully remove any excess adhesive with a sharp knife before the adhesive has fully hardened

Features and benefits

• Repositionable for 2 hours
• Re-sealable cap for prolonged life and multiple uses
• Multi purpose
• Causes skin irritation. May cause an allergic skin reaction. Causes serious eye damage. Toxic to aquatic life with long lasting effects. Keep out of reach of children
• Store in dry conditions between 5°C - 25°C
• Dispense equal volumes of resin and hardener onto the tray provided. Stir well for 45 seconds with the plastic spatula provided, ensuring a thorough mix. Use within 2 hours. Apply the mixed adhesive to both surfaces of the joint and assemble carefully