60 people bought this in 48 hours
Mapei Clear Plaster primer, 1L, 1kg Jerry can
Product details
Product information
Reduces background porosity & consolidates dusty surfaces
Features and benefits
- Improves adhesion bond
- Quick drying
- Water based polymer dispersion for priming plaster walls
- Permits the use of cement based adhesives on plaster
- Environmentally friendly, increases open time of adhesives
Legal information
- EUH208 Contains 1,2-benzisothiazol-3(2H)-one
- 1,2-benzisothiazolin-3-one. May produce an allergic reaction. EUH208 Contains reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H - isothiazol-3-one [EC no. 220-239-6] (3:1). May produce an allergic reaction. EUH210 Safety data sheet available on request.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Application method | Brush or roller |
|---|---|
| Brand | Mapei |
| Colour group | Transparent |
| Container type | Jerry can |
| Coverage | 10m² |
| Drying time | 2 h |
| Location | Interior |
| Model name/number | 020132CD |
| Pack quantity | 1 |
| VOC level | Low |
| Volume | 1L |
| Weight (g) | 1000g |
| Product code | 8022452048449 |
Safety Information
Manufacturer / EU responsible person
Reviews
5 / 5(1 reviews)Tzimi - 5 / 5 - 11/01/2021
Great product, really enhances adhesion
I used this primer to seal my plaster, render, & plywood walls prior to tiling, and also to make the tile adhesive bond better. I'm using Mapei Ultimate Showerproof ready-mixed adhesive and although it doesn't specify any kind of primer in the instructions, I've found that it does work well with this product. The primer is a milky blue-green colour, and it's quickly absorbed by the plaster. It also dries quickly, within an hour or two. You need to be careful not to splash it on any surface you don't want it to go on (such as your bathtub or tiles), as it dries quickly & it's surprisingly hard to clean off! I found that one generous coat was enough, and in fact the instructions warn against multiple coats, as this can cause the product to de-laminate & come away from the wall. As far as I can tell, this product should work with most tile adhesives, and probably paint and wallpaper too. But it's always a good idea to experiment on a small inconspicuous area first to make sure it's working as it should.