Leyland Grey harmony Matt Emulsion paint, 10L
Discontinued
Unfortunately, we no longer stock this item
How much will I need?
Product details
Product information
Leyland is a smooth good all round emulsion, suitable for use on interior walls and ceilings.
- Surface Preparation - Surface must be clean, dry and free from dust and grease. Repair all damaged areas by removing old, loose or flaky paint.
- Surface must be clean, dry and free from dust and grease. Repair all damaged areas by removing old, loose or flaky paint.
Features and benefits
- High opacity means fewer coats are required for a high quality, durable finish
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | Leyland |
|---|---|
| Application method | Brush, paint pad or roller |
| Base | Water-based |
| Colour | Grey harmony |
| Coverage | 13m² |
| Drying time | 4 h |
| Recoat time | 4 hours |
| VOC level | Minimal |
| Volume | 10000ml |
| Product code | 5010426806631 |
Reviews
2.6 / 5(5 reviews)Apple tree 123 - 5 / 5 - 08/04/2020
Fantastic paint
Is it coming back into stock halfway painting my room . Thanks
Painter24 - 5 / 5 - 05/01/2020
Great paint
Used this paint over lining paper and bare plaster. It took 2 coats to cover the the lining paper and 3 for the plaster. It’s a very light grey definitely hasn’t dried blue, think you just need to be careful what colour you your trying to paint over
clfpaintdecor - 1 / 5 - 20/12/2019
Grey Harmony
Absolutely atrocious at covering, worst silk paint ever used...
Stephenl98 - 1 / 5 - 10/12/2019
Grey paint? Dried on wall blue??
Grey harmony? Painted my bed room and it turned out blue, not happy at all.
Perfectionist decor - 1 / 5 - 19/06/2019
paint mixture
Been decorating for 17 years Used this brand in a curstomers house Opened tin, gave it a good whisk Inserted paint in tray Rolled it evenly on roller Chunks of driy grey bit clinging to the wall Opened the 2nd tub Same issue Must be a filtration issue