GoodHome Netley Round Basin Mono mixer Tap
Offer - 20% off when you spend £750+ on bathrooms products. Discount applied in basket.
Product details
Product information
This traditional style chrome mono bloc basin mixer from the Netley collection requires no additional purchases. All of our basin mixer taps come with flexible hoses and wastes. This tap is suitable for high and low pressure water systems.
- Guarantee - 10 years
- Waste supplied
- It is recommended not to use abrasive sponges or scouring agents for cleaning. Do not use cleaning agents containing solvent or acid, limescale removers and household vinegar
Features and benefits
- Water Saving - Features a clever water saving device that helps you save water with every use
- Quality tested - All our GoodHome taps are opened and closed 120,000 times to make sure it will resist your daily use for many years
- High and low pressure - Suitable for all boiler systems
- Nothing to buy separately - Includes flexible hoses and waste
- Anti-limescale - comes with an anti-limescale aerator to prevent the build up of limescale in your tap spout for everyday maintenance *where applicable
- Minimum bar pressure - 0.2 bar
- This identical product is currently available under two of our brand names. Please note that if you order this product online you might receive it in the alternative brand name to the one displayed
Specifications
| Brand | GoodHome |
|---|---|
| Range | Netley |
| Material | Brass |
| Maximum operating pressure | 5bar |
| Model name/number | A30 |
| Number of levers | 2 |
| Operation | ¼ turn |
| Suitable water pressure | High or low pressure |
| Tap mounting location | Basin |
| Product depth | 140mm |
| Product height | 140mm |
| Product width | 110mm |
| Product weight | 786g |
| Product code | 3663602673651 |
Reviews
3 / 5(2 reviews)chris1611 - 5 / 5 - 10/11/2021
Taps
Bought 2 weeks ago. Really good value. Got these for bathroom and working nicely
Poorthread - 1 / 5 - 30/01/2020
Cannot be installed.
Bought the item several months before installing, this was delayed due to illness. On assembly one threaded hole in the tap would not allow either of the two hoses to sit correctly to the end. With the lack of a receipt the only way to make it function was to lightly apply more torque this only resulted in the hose revolving in the same place leaving a gap allowing water to run out. As one thread worked normally and the other didn't this was a defective product. I now have to pay for a replacement.