Form Cusko Grey Zinc alloy Shelving bracket (H)92mm (L)247mm (D)247mm

Product information

Use the floating connectors and brackets to create endless shelving configurations with CUSKO shelves

• Fixings sold separately
• Compatible with 38mm thin floating shelves
• Locate wall studs and mark mounting locations on the top hole of the brackets, ensuring the holes are level. You should install brackets into all possible studs along the length of your shelf for stated load capacities. Partially install screw into marked holes at stud locations leaving a small gap for bracket adjustment. Place the top hole of the bracket onto screw and push down to secure. Use screws to secure the bottom of the bracket into the stud. Tighten down the top screw. Rest shelf on brackets. Use screws to secure the board to the brackets

Features and benefits

• The Cusko wall bracket can be combined with a variety of Cusko shelves
• The maximum load shown may be lower depending on wall condition. All loads should be distributed evenly