Colours Walnut Satin Floor Wood varnish, 2.5L
Discontinued
Unfortunately, we no longer stock this item
Product details
Product information
This quick drying floor varnish in walnut satin can be applied to interior wooden floors, to enhance and protect against knocks and scratches. The low odour, non-yellowing varnish takes 4 hours to dry and will cover up to 45 m² per litre on average.
- Protecting interior wooden floors whilst highlighting the beauty of the wood.
- Suitable for Wood
- Prepare the surface by removing any loose, flaking or peeling coatings completely. For bare wood, lightly sand to remove any loose fibres. Use a cloth dampened with white spirit to remove any dirt, dust or grease.
- Apply evenly in the direction of the wood grain using a brush.
Features and benefits
- Highlights the beauty of the wood grain
- Gives a long lasting finish, which is touch dry in 30 minutes
- Suitable for light traffic areas
- Suitable for use on all interior wood, cork or parquet flooring
Legal information
- Contains 2,2',2"-(hexahydro-1,3,5-triazine-1,3,5-triyl)triethanol and 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Safety data sheet available on request.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | Colours |
|---|---|
| Colour | Walnut |
| Coverage | 45m² |
| Location | Interior |
| Drying time | 4 h |
| Recoat time | 4 hours |
| Finish | Satin |
| VOC level | Medium |
| Base | Water-based |
| Application method | Brush |
| Container type | Tin |
| Suitable surface | Floor |
| Volume | 2500ml |
| Product code | 3663602029717 |
Reviews
5 / 5(3 reviews)Kim199000 - 5 / 5 - 08/10/2022
Great product
Colour is grey in tin but is a great finish colour! Easy to apply by brush definitely recommend drying time a lot quicker than stated on tin. Will be doing 3 coats
Van Girl - 5 / 5 - 25/08/2020
Great value for money
Obviously needs a good stir when first opened but what doesn't eh? Spent lockdown ripping up carpets, sanding the floor boards and using this stuff to finish it off. Been greatly admired so far - really chuffed.
Josidd - 5 / 5 - 10/05/2020
Lovely colour
I was a bit dubious buying this however the application was very easy, just the right consistency. It was dry to touch in 2 hours but i left it over 4 before walking on it. I only did 2 coats which resulted in a nice deep walnut colour... darker than sample on tin. It is a grey colour in the tin!! But lovely colour and coverage... would definitely recommend.