Clearance
Colours Beech Satin Floor Wood varnish, 2.5L
Sold & shipped by B&Q
Was £28 £21 Save £12£16£6.40 per l
Discontinued
Unfortunately, we no longer stock this item
Product details
Product information
This from can be applied to using a . The varnish takes hours to dry and will cover on average.
- Protecting interior wooden floors whilst highlighting the beauty of the wood.
- Suitable for Wood
- Remove any loose, flaking or peeling coatings. For best results, previous coatings of different colours must be completely removed. For bare wood, lightly sand to remove loose fibres. Remove any dirt, dust or grease by wiping over with a cloth dampened in white spirit.
- Apply evenly in the direction of the wood grain using a brush.
Features and benefits
- Highlights the beauty of the wood grain
- Gives a long lasting finish, which is touch dry in 30 minutes
- Suitable for light traffic areas
- Suitable for use on all interior wood, cork or parquet flooring
Legal information
- Contains 2,2',2"-(hexahydro-1,3,5-triazine-1,3,5-triyl)triethanol and 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Safety data sheet available on request.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
DetailsSpecifications
| Brand | Colours |
|---|---|
| Colour | Beech |
| Coverage | 18m² |
| Location | Interior |
| Drying time | 4 h |
| Recoat time | 4 hours |
| Finish | Satin |
| VOC level | Medium |
| Base | Water-based |
| Application method | Brush |
| Suitable surface | Floor |
| Volume | 2500ml |
| Product code | 3663602029724 |