3 for 2 on selected interior paint and 4 for 3 on selected laminate & luxury vinyl click flooring now on. Shop now >>
See more Frost & water proofers
Bonda G4 Pond Sealer - Green 1kg
Sold & shipped by Rustins Limited
Available online only and not stocked in B&Q stores
£
25
Checking availability...
Product details
Product information
Seals porous cement rendered surfaces providing a tough but durable flexible coating.
Can be applied at low temperatures down to 0c. Seals out lime.
Pigmented.
- Guarantee - Statutory
- Will store for many years if suitably stored unopened in original container. NOTE; this is a moisture-hardened product so storage life of opened tins is limited.
- Apply by brush or roller. G4 should be applied onto a bare, clean and dry substrate. Existing coatings, paint or other treatments should be removed. Any loose pointing in brick work should be replaced or worn areas in floors repaired. For most sealing purposes 3 coats are recommended. Each coat can be reapplied when the surface is finger tacky. Do not allow 4 hours to elapse between coats. Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.
- Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.
Features and benefits
Durable deep bonding plastic coating for concrete without the need for a primer.
May be applied at low temperatures.
Forms a non-porous seal on rendered concrete, brick or porous stone.
- Used in conjuction with G4 Damp Seal for coloured finishes in pond and floor coating.
- Hard Wearing
- Non-Porous
- Quick & Easy to apply
- Suitable for application at high & low temperatures & good chemical resistance
Legal Information
- Flammable. Irritant. Avoid contact with eyes and skin. Wear protective gloves and eye protection. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. After contact with skin, wash immediately with soap and water or a suitable skin cleanser. Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.
Specifications
Base | Polymer-based |
---|---|
Coverage per litre | 1.1m²/L |
Drying time | 60-90 min |
Location | Exterior |
Maximum application temperature | 50°C |
Minimum application temperature | 1°C |
Number of pieces | 1 |
Product weight | 1000g |
Recoat time | 15-30 minutes |
Product code | 5014197121306 |