• Guarantee - Statutory
• Will store for many years if suitably stored unopened in original container. NOTE; this is a moisture-hardened product so storage life of opened tins is limited.
• Apply by brush or roller. G4 should be applied onto a bare, clean and dry substrate. Existing coatings, paint or other treatments should be removed. Any loose pointing in brick work should be replaced or worn areas in floors repaired. For most sealing purposes 3 coats are recommended. Each coat can be reapplied when the surface is finger tacky. Do not allow 4 hours to elapse between coats. Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.
• Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.

Features and benefits

Used as damp-proof floor sealing, pond sealing, sealing concrete prior to fibre glass sheathing where alkali in concrete can react with resins.

Also, an ideal coating for plug surfacing before taking mould as release agents and resins do not attack G4.

• Hard Wearing
• Non-Porous
• Quick & Easy to apply
• Suitable for application at high & low temperatures
• Good Chemical Resistance