Blooma 8x8 ft Pent Dark grey Metal 2 door Shed

Check planning permission before installing your garden shed. Make sure you have access to all sides of the shed during construction. Make sure you have a good foundation before starting to assemble the garden shed. Carefully follow the guide to correctly assemble your garden shed.

Ensure that all parts are present before starting assembly. Ensure that the base is firm and level. Your foundation must be flat. If the surface is not flat, remove any obstructions. Remove all parts from the box and sort them by number. Ensure that you have all elements required to build your garden shed.

Always wear work gloves, long sleeves and safety goggles during assembly of the garden shed. Some components contain sharp edges and may cause damage. Take care when using tools for assembly. Familiarise yourself with how to operate all tools. Keep children and animals away from the assembly site.

When necessary to use a ladder, ensure ground stability is adequate. Never rest your entire weight on the roof or on any other part of the garden shed. Do not attempt to assemble the garden shed in strong windy conditions due to the risk of making site conditions difficult and dangerous. Wear safety eyewear when using power tools. Ensure that your electrical tools are watertight to prevent any risk of electrocution.

To maintain their original condition, ensure that nothing is placed on top of shed components. The garden shed must be built on a solid foundation. We recommend a reinforced concrete foundation or large concrete slabs as a suitable floor base. Ensure there is enough room on the foundation for a 10 cm perimeter. The warranty does not cover the choice and construction of your foundation. For a reinforced concrete foundation, prepare a base layer of stones/pebbles. The foundation must have a minimum thickness of 10 cm. Allow cement to dry for at least 48 hours.

Your garden shed must be firmly anchored to your foundation to protect it from strong winds. Do not store pool chemicals in your garden shed. Combustible and corrosive materials must be stored in watertight containers. The metal garden shed must be installed on a level concrete foundation. Ensure that the slab is level and that water can drain off the site. The brand is not liable for the choice and quality of the foundation.

Set your drill’s torque limit to prevent damage to the metal parts.

Check each of the dimensions below to ensure perfect squaring of the foundation.

Remove the protective films prior to assembly. IMPORTANT: Only use screws with plastic washers on top of the pre-painted surface.

We recommend removing snow from the roof after each snowfall. A thickness of over 10 cm of snow may become hazardous! To disassemble the garden shed, the customer must follow the instructions in the manual in reverse order. Do not walk on the roof! Risk of falling