UniBond Mould Resistant Sanitary Sealant Cartridge White 274 g, 2 Pack

• Guarantee - Statutory
• Suitable for Metal, rubber, wood & plastics except PTFE, HTPE, PP

Features and benefits

• SURFACE PREPARATION: All surfaces must be clean and dry, free from dust and grease or, anything which may be detrimental to the correct adhesion of the sealant. Residues of old sealant or other materials as well as mould on the substrate must be removed completely (if necessary, use a silicone remover). To get the best sealing results it is recommended to mask off the edges of the joint with masking tape before applying the sealant
• SEALANT APPLICATION: The sealant should be applied to ensure that the seal is filled. Smoothing off the seal ensures good contact between the sealant and the bonding surfaces. Directly after application, smooth off with an UniBond Sealant Smoother Tool. Remove any tape immediately, before the surface skin has formed on the sealant. Smooth over any proud sealant edges immediately.
• CLEANING AND FINISHING: Fresh sealant may be cleaned with a cloth soaked in white spirit (e.g., methylated spirit) Cured sealant can be removed by scraping (e. g. using a razor blade) or by using a special silicone remover product.
• DRYING TIME: Fully dry in approximately 24 hours