Trend CDJ300 Craft Dovetail Jig 300mm Cuts Dovetail Joints + Digital Depth Gauge

The Trend CDJ300 Craft Dovetail Jig is accurate and easy-to-use for a variety of elegant dovetail joints. It cuts 12.7mm (1/2in) wide half blind dovetails or rebated dovetails in one operation.

The CDJ300 is precision made laser cut zinc plated steel template with packing piece. Please note a Unibase and fine height adjuster may be required for certain makes of router.

Supplied with 1 x 1/4in shank TCT 104� Dovetail Cutter and 1 x 15.8mm Guide Bush.

Specification:

Rating: Craftsman.

Dovetail Size: 12.7mm.

Workpiece Width Max: 300mm.

Workpiece Thickness Min: 12mm.

Workpiece Thickness Max: 25mm.

Guide Bush Size: 15.8mm.

Router Base Diameter Max: 180mm.

GAUGE/D60 - Trend Digital Depth Gauge

Digital depth gauge for router tables and saw benches. Horizontal and vertical measuring.

For hand routers, router tables and saw benches.

LCD readout for mm, imperial and fractions with auto shut off 5 mins.

Removable pin to allow hole depths to be measured. Pin can be parked on arm. Hole depth 50.8mm (2 inch).

Self standing with magnetic feet and flat back.

Injection plastic moulding with plastic rule.

60mm wide aperture.

Read-out has relative co-ordinate and absolute function.

Includes small rebate clip that fits to the base of the rule to allow the rule to be set flush to a router table back fence