See more Motorised valves

Home

Right chevron

Central heating

Right chevron

Motorised valves

Right chevron
Left chevron
icons.title_zoominicons.title_zoomouticons.title_zoomreset
Tower 22mm Motorised 2 Port Inline Zone Valve for Central Heating / Boiler System
Right chevron

Tower 22mm Motorised 2 Port Inline Zone Valve for Central Heating / Boiler System

Sold & shipped by SPARES2GO

Available online only and not stocked in B&Q stores

£
46.19
Loading
Checking availability...

Product details

Product information

    Tower 22mm Motorised 2 Port Inline Zone Valve for Central Heating / Boiler Systems VAL222MV

    • Manufacturer guarantee-6 months

    Features and benefits

      Genuine original Tower 2 port spring return zone valve with 22mm compression fittings and an auxiliary switch. This is for general purpose flow control applications or central heating systems. When correctly wired with an appropriate room thermostat, cylinder thermostat and programmer the valve will control the water flow from the boiler to hot water and from boiler to central heating.


      Specifications:

      Supply Voltage: 220 - 240V AC 50Hz

      Power Consumption: 6W

      Operating Temperature Range: +5 to +88°C

      Cable Length: 1 Metre

      Max. Differential Pressure: = 1Bar

      Max. Static Pressure: 10.0 Bar

      Max. Fluid Temperature: 100°C

      Max. Ambient Temperature: 52°C

      Compression fittings included

      Synchronous motor drive / spring return action

      Auxiliary switch

      Switch rating 3A resistive

      Integrated manual lever for commissioning purposes

      Installation instructions included

      Arrives boxed


      Wiring:

      All wiring should be carried out to IEE Regulations

      Brown: Live

      Orange: End Switch Out

      Grey: End Switch In

      Blue: Neutral

      Green & Yellow: Earth


      Plumbing:

      When connecting to pipe work do not use the actuator for leverage. Valves should be held by wrench flats on body. Place the AUTO / MAN lever in the MAN position when filling, venting or draining the system.


      ***IMPORTANT: All controls must be earthed. All valves should have a means of disconnection from electrical mains supply which incorporates a contact separation of at least 3mm in all Poles. All wiring must be carried out by a competent electrician.***

      • Tower Motorised 2 Port Inline Zone Valve for Central Heating / Boiler Systems
      • For general purpose flow control applications or central heating systems. When correctly wired with an appropriate room thermostat, cylinder thermostat and programmer the valve will control the water flow from the boiler to hot water and from boiler to central heating.
      • Supply Voltage: 220 - 240V AC 50Hz -- Power Consumption: 6W
      • Operating Temperature Range: +5 to +88°C -- Cable Length: 1 Metre
      • Max. Differential Pressure: = 1Bar -- Max. Static Pressure: 10.0 Bar
      • Max. Fluid Temperature: 100°C -- Max. Ambient Temperature: 52°C
      • Synchronous motor drive / spring return action -- Integrated manual lever for commissioning purposes -- Auxiliary switch -- Switch rating 3A resistive
      • Compression fittings included -- Installation instructions included -- Arrives boxed

      Specifications

      BrandTower
      Pack quantity1
      Product weight1.05g
      Cable length1m
      Connection typeCompression
      Installation type5-wire
      Maximum water temperature100°C
      Number of ports2
      Power consumption in use6kWh
      Product depth125mm
      Product height90mm
      Voltage240V
      Product code5028415001042