See more Water levels
Toolty Water Level Gauge Kit 3/8 inch Diameter 10m Length for Masonry Window and Sills Levelling DIY
Sold & shipped by Toolty
Available online only and not stocked in B&Q stores
Product details
Product information
Water level is particularly useful when determining the level over long distances in the construction industry, during bricklaying and earthworks, e.g. when leveling windows or window sills in adjacent rooms.
- Guarantee - Statutory
Features and benefits
Toolty Water Level Gauge Kit is used for leveling points that are far apart. Measuring tubes with a readable scale are made out of durable plastic (PVC). Tight plugs prevent the outflow of water at the place of measurements.
Instructions:
1. Fill the hose with water almost completely (leave columns of air about 5-10 cm long at the hose ends), while trying to prevent air bubbles from entering the hose.
2. Hold the hose ends at the same height. Allow the water level to equilibrate freely. Mark both levels of the surface of water on the hose.
3. Put on the end plugs. They will prevent an outflow of water to the place of measurements. After reaching the measurement levels, remove the plugs.
In case of water loss, refill and adjust the device. Colours on images on different devices may vary. We cannot guarantee an exact match of the colour to the product.
- Product made out of thick, flexible PVC that is extremely durable.
- Has 150mm range of markings for level comparison and fall calculation.
- This water level has length of 10m.
- Clip-on plastic water cap prevent leakage at the place of measurement.
- Calipers with a legible indicator allow trouble-free reading of measurment results.
Specifications
| Hose length | 1000mm |
|---|---|
| Model name/number | TLTY-P10 |
| Number of pieces | 1 |
| Product weight | 562g |
| Spirit level product type | Water |
| Product code | 5060649204677 |