See more Sealants
Stonecare4U - Black Tarmac Sealer (15L) - Professional Grade Tarmac Restorer in Black, Long Lasting Protection & Easy Application
Sold & shipped by Stonecare4U Ltd
Available online only and not stocked in B&Q stores
Product details
Product information
Stonecare4U's Black Tarmac Sealer is formulated with a blend of acrylic resins that restore the original colour, flexibility and weather resistance of the tarmac surface. There is usually no need for expensive asphalt replacement because this sealer recolours the surface and replaces lost resins from the tarmac. Importantly, it also covers unsightly cement & oil stains or marks and brings the surface back to life. It’s the quick and easy solution to renewing your tarmac and is ready to apply straight from the bottle. The tired, dull & worn appearance of your tarmac drive or paths is transformed, returning them to a good-as-new look with our long-lasting, pigment-based formula. Your tarmac drive or path can be restored so have a go: you will be amazed at the results!
Up to 5m² per litre per coat. Up to 25m² per 5L. Do not dilute the product.
Coverage will vary greatly depending on the age, condition, surface porosity and texture of the tarmac.
If rain is forecast for up to 4 hours after application, do not apply Essential Black Tarmac Sealer. Wait for a better time. Always try the product in an inconspicuous area prior to use. Sensitive surfaces which are not to be sealed should be protected with masking material.
- Guarantee - 6 months
- Suitable for Exterior use
- Path, patio & driveway
Features and benefits
Ensure the surface is gently but thoroughly cleaned, and any loose stones are swept off before any application of this sealer. A pre-treatment with green growth remover will be necessary 4 to 5 days prior to applying the sealer if green growths such as algae and green growth are present.
Importantly, make sure weather conditions are favourable before commencing for a smooth and uninterrupted application process!
Ensure you have adequate safety wear, i.e. gloves, mask, suitable protective eyewear & clothing before you start work.
Firstly, make sure the surface is completely clean and allow a minimum of 3 to 4 dry days before sealing. Use a smaller brush or roller to carefully apply Essential Black Tarmac Sealer to the edges or borders and fine lines to achieve a tidy finish. For larger areas, apply generously and evenly using a good-quality floor roller. Do not dilute. Leave to dry for 45 to 60 mins.
Secondly, repeat the process of applying Essential Black Tarmac Sealer in the opposite direction for even colour distribution. Before driving or parking cars on the surface, please allow 24 hours after the application. Your tarmac will be suitable for light foot traffic after 1-2 hours.
- Our Black Tarmac Sealer restores & replaces the of the driveway or other hard surface with ease, bringing a new freshness to your home.
- Once applied, the sealer covers over the top of oil & cement stains to create a over the top and bring the surface back to life. Does this by replacing the lost resins which made it brittle and de-coloured.
- Application is swift and easy, can be done via a smaller and should be left to dry for around an hour. Two coats recommended.
- Removes need for a full driveway replacement by providing a which arguably does a better job!
- Average coverage of this product is 3 - 5m2 per litre, which relies upon the condition ot the tarmac you are treating.
Specifications
| Application conditions | Dry |
|---|---|
| Colour | Black |
| Maximum operating temperature | 23°C |
| Minimum operating temperature | 13°C |
| Pack quantity | 3 |
| Product weight | 15000g |
| Solvent-free | Solvent-free |
| Volume | 15000ml |
| Product code | 5061002780418 |
