See more Glues & adhesives
Orac FDP600 DecoFix Pro 4200ml Grab Adhesive For Use With Orac Mouldings
Sold & shipped by HOUSE MARTIN GRP LIMITED
Available online only and not stocked in B&Q stores
£
73.52
£
17.50
per L
Checking availability...
Product details
Product information
A slow drying strong contact adhesive for interior use to fit Orac Decor mouldings. Paintable after hardening in approximately 24 hours. Coverage up to 88m per catridge depending on use. Remove excess with damp sponge or cloth. Ensure surfaces are dry and dust free and ideally bond. If plastered within three months or installation is in damp environments such as bathrooms and kitchens, use the hydro FDP700. Use Cartridge Gun to apply and FX400 for joints (excepting Basixx CB range where the adhesive is to be used if unsure please check). Interior use only. See smaller FDP500 for tube & cartridge gun usage.
- Guarantee - 1 year
- Suitable for Expanded polystyrene (PS) foam
- Store away from frost and cold weather, store in a dry place
- Use a paddle or similar to apply
Features and benefits
- Strong installation adhesive for interior, porous AND dry surfaces
- Paintable after hardening (min. 24 hours)
- Remove with humid sponge or cloth
- Long-lasting seal between mouldings and the wall and/or ceiling
- Strong, water-based acrylic glue
- Large tub for use with larger quantities of Orac mouldings
- Items per pack: 1
Specifications
Base | Acrylic-based |
---|---|
Bonding strength | Strong bond strength |
Colour | White |
Container type | Tub |
Drying time | 1 day |
Location | Interior |
Maximum application temperature | 35°C |
Minimum application temperature | 10°C |
Odour | Low odour |
Sandable | Sandable |
Solvent-free | Solvent-free |
Substance | Acrylic |
Volume | 4200ml |
Weight (g) | 400g |
Product code | 5414433041977 |