Orac Decor C360 Premium Coving Moulding 4 Pack

The C360 coving is a small contemporary design inspired by J Vergracht a top European architect. The C.360 cornice design brings a linear style to ceiling mouldings featuring a shadow line "notch" at the back edge of the section. C360 coving or cornice is the smallest of the Orac Luxxus art deco coving designs. This coving is designed to give a floating effect to the ceiling as it puts the ceiling to wall join out of view. This art deco coving is ideal for new minimalist properties and homes designed in the periods when art deco flourished the 1920-1930s and 1960s onwards. The coving profile is 2 x 6cm with a single step and tapered front edge. Best suited to small rooms with low ceilings for example; bedroom coving bathroom coving kitchen coving hallway coving and coving for flats. The Orac Luxxus art deco coving range allows for an appropriate coving size for differing room sizes. There are four larger Orac Luxxus coving designs. In size order: The C356 art deco coving C353 art deco coving C355 art deco coving and C354 art deco coving. Please ignore the odd sequencing of the product codes; this is a consequence of the introduction of new coving sizes over time. Two similar coving designs have been introduced in the Orac Axxent coving range the CX160 art deco coving and CX161 art deco coving. The Orac Luxxus coving is a Purotouch plastic coving produced from high density polyurethane and made in steel moulds. The Orac Axxent coving is a Duropolymer plastic coving produced from high density polystyrene and extruded. The advantages of plastic coving over plaster coving are set out on the coving home page. A range of Orac Luxxus mouldings are available to use with the C360 art deco coving. Suggestions are the P7070 P9900 and P5051 dado rail or panel mouldings and the SX105 and SX155 skirting board. Length: 200cm Height: 2.1cm Width: 6cm