See more Roof sealants
NJL Black Bitumen Primer and sealer for porous surfaces 5L
Sold & shipped by NJL DIRECT LIMITED
Available online only and not stocked in B&Q stores
£
27.99
£
0.01
per L
Checking availability...
Product details
Product information
Njl Direct Black Bitumen cold applied Primer and sealer for porous surfaces 5L
- Guarantee of Statutory
Features and benefits
- Mainly used for priming
- Fast drying
- Suitable for use with all bituminous surface coatings,Weathered corrugated iron and steel.
- Concrete roofs, floors, cementicious screeds, renders, Bitumen felt, asphalt, mastic
- suitable as a primer prior to applying any flashing tape system
Legal Information
- Label Info 1: Signal Word DANGER Label Info 2: Hazard Statements H372 Causes damage to organs through prolonged or repeated exposure.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects.H226 - Flammable liquid and vapour EUH 066 Repeated exposure may cause skin dryness or cracking. Label Info 3: Precautionary Statements P102 Keep out of reach of children.P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P260 Do not breathe dust/fume/gas/mist/vapours/ spray.P271 Use only outdoors or in a well-ventilated area.P273 Avoid release to the environment.P280 Wear protective gloves/protective clothing/eye protection/face protection.P302 + P352 IF ON SKIN: Wash with plenty of water/…P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P314 Get medical advice/attention if you feel unwell.P403 + P233 Store in a well-ventilated place. Keep container tightly closed.P501 Dispose of contents/container in accordance to local regulations.
Specifications
Brand | NJL |
---|---|
Active substances | White Spirit |
Application method | Brush, roller or spray |
Base | Solvent-based |
Colour group | Black |
Container type | Tin |
Coverage | 50m² |
Coverage per litre | 10m²/L |
Curing time | 24h |
Drying time | 3-6 h |
Number of coats | 2 |
Paint base density | Medium base |
Product weight | 5000g |
Recoat time | 12 hours |
Surface preparation | As with all surface coatings, preparation of the surface is of great importance and will influence the degree of adhesion obtained and the life of the coating. All surfaces must be sound, stable and thoroughly clean and dry. Metal surfaces should be wire brushed to remove rust. Where long term protection is required an initial treatment of a rust-inhibitive product such as red lead or zinc phosphate should be used. Loose or blistered paint should be removed, as should tar-based paint systems. New galvanised surfaces should be roughened with a wire brush |
Texture | Smooth |
VOC details | 464g/L |
VOC level | High |
Volume | 5000L |
Product code | 5060502360441 |