Limelite Renovating Plaster 5 x 25kg Bags

• Guarantee - 1 month
• Not paintable
• For best results Limelite Renovating Plaster should be mixed in a clean mixing vessel using a mechanical mixer such as a slow-speed drill and paddle mixer. Fill bucket with approximately 12.5 litres of cool, clean water. Add 25kg of dry powder to the water and mix for 2-3 minutes until a smooth, homogeneous working consistency is achieved. Allow to rest for 3 - 5 minutes, then re-mix back to consistency adding small amounts of water if necessary.
• Comes with 5 x Bags Limelite Renovating Plaster
• Limelite Renovating Plaster should always be used with a skim coat of Limelite High Impact Finishing Plaster.
• Not resistant to impact

Features and benefits

Limelite Renovating Plaster has been developed specifically for use in renovation projects. It offers many of the advantages of a traditional lime plaster but with easier workability and far quicker drying times.

Limelite Renovating Plaster can be used to replace existing lime based plaster or as part of a new plaster system in both modern and traditional buildings and is an ideal solution for flood damage repair or flood damage prevention.

Breathable

Conventional gypsum plaster is hygroscopic, meaning that moisture from the atmosphere or substrate is absorbed and retained. Limelite Renovating Plaster is breathable, allowing moisture to be released.

Reduces mould growth

Improved breathability and less retained moisture helps to avoid mould growth and efflorescence. Lime is naturally aseptic and inhibits the growth of bacteria and mould.

Versatile

Can be used on a wide range of traditional substrates such as solid brick and stone walls, wooden lath. It can also be used on walls that have previously suffered from damp or flooding.

Quick drying

A quick drying renovating plaster, it dries quickly. Additional plaster coats or paint to be applied in just 24 hours. This allows faster completion and less disruption.

Reduced shrinkage

Incorporates polypropylene fibres to control shrinkage, avoid cracking and improve the flexural strength and impact resistance of the finish.

The Limelite plaster will be shrink wrapped on a pallet and delivered on a large truck it will need space to drop using a tail lift due to weight.

• Breathable – can be applied directly to damp walls and substrates
• Prevents corrosion of metal fixtures, such as angle beads and lath
• Provides a barrier to salt and efflorescenc
• Lightweight – less than half the weight of a sand and cement plaster
• Fibre reinforced
• Reduces condensation
• Rapid drying – 24 hours per coat
• Lime content makes the product naturally aseptic, preventing mould growth