Kair Rectangular Straight Connector 150mm x 70mm Flat Pipe Joint

Kair Rectangular Ducting Female Connector Joint

Female connector to join lengths of duct channel. Kair 150mm x 70mm pipe - Part: DUCVKC604 will fit inside the connector. Kair System 125 Flexible Hose Part: DUCR3M/150/70 will fit over the connector.

Kair ducting is easy to install, just push-fit ducting and connector together. For permanent fixings, seal joints with silicone sealant, solvent cement, or tape.

Made in the UK

Material: Polystyrene/Polypropylene.

Max / Min Temperature: +60c / -15c.

Static Pressure Drop in Pascals: 15 l/s = 0.10 Pa - 30 l/s = 0.44 Pa - 60 l/s = 1.95 Pa.

Airflow performance independently tested by BSRIA or BRE.

Suitable to use in compliance with Part F Building Regulations.

Kair plastic ducting is lightweight, durable and suitable for commercial and domestic use. It is perfectly suited for ducting your tumble dryer, bathroom or kitchen extractor fan, hydroponics, in-line extract fans, or cooker hood. This connector can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems.

Rectangular Ducting is designed for use with medium to high capacity extraction systems and cooker hoods. It is perfect for flush fitting against ceilings and walls and can be concealed above wall units or inside ceiling voids.