Kair Rectangular Flat Ducting 110mm x 54mm - 1 Metre Length Flat Channel Pipe

Kair Rectangular Flat Ducting 110mm x 54mm - 1 Metre Length Flat Channel Pipe

Pipe ends are male fittings and will fit inside 100mm ducting such as System 100 Kair female fittings such as 90 degree bends. Lengths of duct channel can be joined together using a female connector Part: DUCVKC235.

Use flat channel ducting clips to fix ductwork to walls and ceilings and support ducting tube Part: DUCVKC230.

Kair rectangular ducting is designed for short duct runs and it can be easily concealed due to its low profile. It is perfect for installations requiring low extraction rates such as bathrooms, toilets, and utility rooms. It can be flush fitted against ceilings and walls and can be concealed above wall units or inside ceiling voids.

Max / Min Temperature: +60c / -15c.

Made in the UK using UVPC Plastic

Easy to install, just push-fit duct and fittings together

Suitable to use in compliance with Part F Building Regulations

Airflow performance independently tested by BSRIA or BRE

Free Air = 5424 mm

Static Pressure Drop in Pascals: 15 l/s = 2.21 Pa - 30 l/s = 8.56 Pa - 60 l/s = 33.10 Pa.

Easy to install, just push-fit duct and fittings together. Kair plastic ducting is lightweight, durable and suitable for commercial and domestic use. It is perfectly suited for ducting your Tumble Dryer, Bathroom or Kitchen extractor fan, Hydroponics, In-Line Extract Fans, or Cooker Hood. This pipe can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and Heat Recovery Systems.

Genuine Kair product & covered by the Kair 100% Satisfaction Guarantee. Search for Kair Ducting for the full range of compatible 110mm x 54mm rectangular and 100mm Round fittings, outlets, and grilles.