Excel 250mm Table Saw 240V/1800W with Legstand Side Extensions & Blade

• Guarantee - 1 year
• Comes with 1 x Blade 1 x Blade Guard 1 x Push Stick 1 x Handle 1 x Miter Gauge 1 x Rip Fence 1 x Locking Lever 16 x Screws & Nuts 2 x Closed End Wrench
• Includes plug

Features and benefits

Key Features

Design & Portability: Excel 250mm table saw with a powerful 1800W motor has compact and lightweight design that provides easy to manoeuvre, easily movable, portable and easy to use.

Application: The bench-type circular saw is designed for the slitting and cross cutting (only with the cross stop) of all types of timber commensurate with the machine's size. The equipment is not to be used for cutting any type of round wood.

Cutting Capacity: Our 250mm Table Saw is ideal for making rip cut, miter cut and bevel cross cut. It has maximum cutting height 85mm at 90° & 65mm at 45° and the saw blade can be tilt 0°-45°.

Reset Button: This saw comes with an overload reset button. If the saw motor over loads, a safety mechanism stops the motor automatically due to motor overloading or low voltage.

Rip Fence: Putting your materials against the adjustable rip fence allows you to feed the material through, easily and with a perfectly straight finish.

Push Stick:Push sticks are devices that may be used for pushing a workpiece through the blade in any rip cut. When making non-through cuts or ripping narrow stock, always use a push stick, push block, and/or feather-board so your hands do not come within 3 inches of the saw blade.

Accessories Includes

1 x Blade

1 x Blade Guard

1 x Push Stick

1 x Handle

1 x Miter Gauge

1 x Rip Fence

1 x Locking Lever

16 x Screws & Nuts

2 x Closed End Wrench

Specification

Brand: Excel

Voltage: 220-240V ~ 50Hz

Power: S1 1800W, S6 25% 2000W

No-load Speed: 5000rpm

Blade Size: 250mm

Dust Port: 35.5mm

Cutting-off Wheel: 250 x 16 - 30 x 2 - 4mm

Number of Teech: 24 - 60

Table Size (L x W): 583 x 563mm

Table Width Extension (Left & Right): 583 x 165mm

Max Cutting Height @ 90°: 85mm

Max Cutting Height @ 45°: 65mm

Tilting Saw Blade: 0°-45°

Extractor Socket: 35mm

Weight (approx.): 22kg

• Ideal for making rip cut, miter cut and bevel cross cut
• 85mm maximum cutting height at 90° and 65mm at 45°
• 0°-45° saw blade tilting and includes a legstand
• Powerful 1800W motor with overload protection