See more Plaster
Dryzone Damp-Resistant Plaster 23kg x 10
Sold & shipped by Safeguard Europe
Available online only and not stocked in B&Q stores
£
263
Checking availability...
Product details
Product information
Dryzone Damp-Resistant Plaster is a breathable pre-blended plaster developed to control dampness and salt migration in walls.
The plaster is used as part of the Dryzone System for replastering after Dryzone Damp-Proofing Cream or Dryrod Damp-Proofing Rods have been used to create a remedial damp proof course.
This highly effective renovation plaster has a porous structure which controls salt migration and allows walls to dry out by
evaporation. Suitable for use on salt and damp contaminated walls and provides enhanced salt protection compared with competing products.
- Guarantee - Statutory
- Remove the existing plaster up to 30 cm above the highest visible line of the rising damp in accordance with BS 6576. Remove all loose and brittle material which could prevent even adhesion to the surface. In the case of high salt concentration, scrape or brush the wall until the original masonry is visible. First fill the cavities and level the surface. Dryzone Hi-Lime Renovation Plaster should be mixed with a drill mixer. Pour 5.5 litres of water into the container, then slowly add Plaster while mixing for 3 - 4 minutes until a smooth and creamy texture is obtained with no lumps. Dryzone Hi-Lime Renovation Plaster is applied in two subsequent layers as follows: Rough coat: 5 mm layer Apply a rough coat of at least 5 mm thickness. This will act as an anchoring layer.
Features and benefits
- Controls dampness & salt migration
- Breathable - allows wall to dry naturally
- Insulating properties - warm to the touch
- Reduces condensation on walls & retards mould growth
- Prevents rusting of angle beads, conduits etc.
Specifications
Brand | Dryzone |
---|---|
Pack quantity | 1 |
Product weight | 23kg |
Ready for use | Ready mixed |
Quick dry | Quick dry |
VOC level | Low |
Volume | 23L |
Product code | 5060132764923 |