Charnwod W629P 8" Table Saw with Wheel Kit and Low Noise Blade

Package:W619 8″ Cast Iron Table Saw, W522 Wheel Kit, TB0840 40 Tooth TCT Low Noise Blade

W619 Cast Iron Table Saw with an 8″ diameter blade

W619 Table saw is a compact, high quality table saw with a quiet induction motor. The main table is precision ground cast iron, and has 2 fabricated side extension tables to give impressive cutting capacities, perfect for the smaller workshop. The induction motor turns the blade via a drive belt which reduces noise and increases accuracy. Blade height and blade angle are controlled using 2 separate hand wheels. The sliding carriage has a cast iron bed travelling on 4 bearing guides. Any angle can be set on the long support fence. A screw clamp holds the work secure and a flip over length stop is fitted for repeat cuts. Supplied with 18 tooth TCT sawblade, sliding carriage, extension tables, floor stand, adjustable feet, push stick, 2.0m power cable and UK 3 pin plug.

For compact storage the extension tables and sliding carriage can be quickly removed, (2 minutes). They reassemble without any further setting up required.

Charnwood W619 Specification

Main Table Size 530mm x 1000mm

Maximum Ripping Width Using Fence 730mm

Crosscut Table Size 400mm x 180mm

Maximum Crosscutting Width 600mm (700mm Using Reverse Table)

Blade Tilt 90 – 45 degrees

Cutting Depth at 90 degrees 60mm

Cutting Depth at 45 degrees 47mm

Blade Diameter 200mm

Blade Bore 30mm

Work Table Height 860mm

Mitre Guide T-Slot Width 15/19mm

Mitre Guide T-Slot Depth 7mm

Motor (induction) 1100w (1.5hp) / 240v

No-Load Blade Speed 4700 rpm

Minimum Blade Width (Kerf) 2.6mm

Dimensions (WxDxH) 1460 x 1010 x 1030mm

Weight 90Kg

Rating Light Trade

Product Guarantee 5 Years

W522 Wheel Base: Convert your machines into portable units with this wheel base.

TB0840 Saw blade High quality precision blade for professional users packed with the latest technology.