Central Heating Inhibitor with Biocide C100B

• Manufacturer guarantee-1 year
• Gravity Fed: Turn off all components electrically in the system. Turn off the water supply to the system via the F+E tank (feed and expansion) usually in the loft. Find a drain point and drain the heating system. Go back to the F+E tank and tip the required dose of Inhibitor into the tank. Most normal house heating systems with 10 – 13 radiators will only need one 1 bottle. Re-fill and vent the heating system. Pressurised: Turn off all components electrically in the system. Turn off the water supply to the system. Find a drain point and drain the system. CLOSE THE DRAIN OFF VALVE. Select a radiator and close the valves at both ends. Open the radiator bleed key and release any pressure. Remove the radiator key completely and attach the inhibitor equipment to the radiator. Whatever injecting equipment you use, there will be a plastic tapered insert that you screw into the radiator bleed hole. Open the radiator valves and begin to inject the inhibitor. Wait for few seconds to let some air into the radiator and gives you a chance to release any pressure without losing any inhibitor. Close the radiator valves and release your injector. Replace the radiator bleed valve key. Open the radiator valves and re-pressurise the system. Usually in most domestic houses it will be a cold pressure of .75-1.0 bar. Turn on the components in the system
• Store in a cool dry place

Features and benefits

Choose Trade Chemicals Central Heating Inhibitor with Biocide today and harness the utmost potential of your heating system. Revel in heightened efficiency, increased reliability, and significant cost savings. Elevate your heating experience.

For best results, systems should be cleansed and flushed with C300 in accordance with BS7593:2006

Safety Data Sheets available upon request.

Why treat your heating system water?

All heating systems have two major substances: metal and water. Oxidisation (rust) may occur inside pipes, boilers and radiators.

To have an efficient and healthy heating system this chemical reaction needs to be prevented. This is why a heating system inhibitor is used.

• Added Biocide for Low Temperature Systems: Our new formula, supplemented with biocide, is ideally suited for low temperature heating systems, providing superior protection against microbial growth and maintaining system health.
• Protects Against Corrosion: Guard your heating system from damaging corrosion which can lead to expensive damage and repairs. Trade Chemicals C100B Central Heating Inhibitor creates a defensive layer that protects against rust and corrosion, securing flawless operation for the long haul.
• Boosts Energy Efficiency: Limescale, sludge, and debris accumulating in your heating system can diminish its efficiency, leading to increased energy consumption and costs. With the Trade Chemicals Inhibitor, clear away these deposits, reinstating your system's peak performance and curtailing energy wastage.
• Optimizes Heat Output: As central heating systems age, they can suffer from diminished heat output. Overcome this challenge with the C100B Inhibitor. By clearing obstructions and preventing blockages, our inhibitor promises even and efficient heat distribution throughout your living space, assuring year-round warmth.
• Extends System Lifespan: Choosing Trade Chemicals C100B Central Heating Inhibitor, enhanced with biocide, is a prudent decision for those looking to extend the life of their heating system. From halting corrosion to improving performance, our inhibitor is your shield against costly repairs or early replacements.
• Cost Savings: The Trade Chemicals Inhibitor doesn't just guarantee system longevity but also makes fiscal sense. By enhancing energy efficiency, expect notable reductions in energy usage, translating to decreased utility bills and enduring savings.
• Easy to Use: Designed with user-friendliness in mind, the Trade Chemicals Central Heating Inhibitor ensures a hassle-free addition to your central heating system, minimizing interruptions.