See more Glues & adhesives
Cascarez Liquid Resin Polymer Wood Glue - Fast Grab - 1Ltr
Sold & shipped by Ureka Global
Available online only and not stocked in B&Q stores
Product details
Product information
The Cascarez Fast Grab Wood Adhesive 1 litre.
Cascarez Fast Grab Wood Adhesive bonds in ten minutes, for fast assembly work. Fast grab, fast bond wood glue drying clear. It is easy to apply straight from the nozzle, forms a water-resistant, strong bond and is an ideal product for general joinery, furniture and kitchens. The ultimate fast grab wood adhesive.
Used correctly it will bond most woods in 10 minutes and be ready to handle in 30 minutes.
Bonds stronger than the wood itself in less than 2 hours!
Suitable for all woods and joinery, assembly of doors, window frames and furniture. Not suitable for continuous immersion in water.
Ideal to use for: Cabinet making, General joinery, Doors, Window frames, Furniture.
Tack time: 10 minutes, cure time: 2-4 hours.
This polymer emulsion, exterior or interior EN204D3, is the highest grade of wood adhesive available.
Cascamite
A04
B0051
- Guarantee - Statutory
- Suitable for Wood
- Clean down with warm water, with a little detergent added is recommended. Care should be taken to avoid drying out on equipment as water resistance makes cleaning difficult.Store in unopened containers in a cool dry place away from direct sunlight.
- Joints should be smooth and well fitted. The surfaces to be bonded must be close fitting and free from dirt, grease or any other contamination that may interfere with the adhesion. Moisture content of timber should be 5 to 15 %. Abrading the surface of the joint before assembly is recommended. Apply the glue using a stiff brush to one surface only. Assemble and clamp (pin or screw) the joint whilst the glue is wet. Keep the joint under pressure until set. A damp cloth can be used to remove excess wet adhesive.Assembly should be carried out as soon as possible within the open time (approx. 5 minutes dependent on temperature and humidity). Pressing should be carried out after assembly whilst adhesive is still wet. A press time of 15 to 25 minutes is recommended at 20°C. In heated press the minimum process time can be reduced to 3 to 5 minutes at 70% Pressure should be 30 to 100 PSI
Features and benefits
Brand: Cascamite Category: Wood Adhesives Height (mm): 255 Width (mm): 88 Depth (mm): 88 Weight: 1.052
- Brand: Cascamite
- Quick curing
- Category: Wood Adhesives
- Meets requirements of BS EN 204 D3
- Height (mm): 255
- Very strong bond
- Width (mm): 88
Specifications
Application method | Tube |
---|---|
Colour | White |
Container type | Bottle |
Drying time | 10-20 min |
Location | Interior & exterior |
Model name/number | E053354 |
Odour | Low odour |
Sandable | Sandable |
Solvent-free | Solvent-free |
Weight (g) | 1g |
Product code | 5060584710219 |