See more Frost & water proofers
Britannia Paints Durashield Fast Drying Primer Clear 5L - Stabilises Highly Friable/Porous Surfaces
Sold & shipped by Britannia Paints LTD
Available online only and not stocked in B&Q stores
£
82
£
18.22
per L
Checking availability...
Product details
Product information
Ready for use on highly friable/porous surfaces e.g. Concrete, Asbestos Cladding, Sheeting And Guttering, OSB/Plywood, Wooden Substrates. See primer guide for other surfaces.
- Guarantee - Statutory
- Store in a well-ventilated place. Keep container tightly closed.
- DO NOT THIN Stir well before use as separation could occur. To the dry and cleaned surface, apply a generous coat of Britannia Durashield FD Primer by brush or roller at the specified spreading rate as stated under the heading. The substrate and ambient temperature for the application of the system must be between 5°C and 30°C. DO NOT APPLY to frozen or damp surfaces. DO NOT APPLY in hot direct sunlight or coating may skin. Work away from the area immediately being applied and toward a suitable escape access. Do not walk on newly coated surface whilst application is in progress.
- Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/protective clothing/eye protection/face protection/hearing protection. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water . IF INHALED: Remove person to fresh air and keep comfortable for breathing. In case of fire: Use media other than water to extinguish. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
- Instructions for use: DO NOT THIN Stir well before use as separation could occur. To the dry and cleaned surface, apply a generous coat of Britannia Durashield FD Primer by brush or roller at the specified spreading rate as stated under the heading. The substrate and ambient temperature for the application of the system must be between 5°C and 30°C. DO NOT APPLY to frozen or damp surfaces. DO NOT APPLY in hot direct sunlight or coating may skin. Work away from the area immediately being applied and toward a suitable escape access. Do not walk on newly coated surface whilst application is in progress.
Features and benefits
- Stabilises Highly Friable/porous Surfaces Prior to Application of Durashield Topcoat
- Easy to Use
- One Pack, No Mixing
- No Wastage
- Ensures Durashield Topcoat Delivers Optimum Waterproofing Performance
Legal Information
- Warning. Contains: HYDROCARBONS, C9, Aromatics, WHITE SPIRIT. Flammable liquid and vapour. May cause respiratory irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects.
Specifications
Base | Solvent-based |
---|---|
Coverage per litre | 4m²/L |
Drying time | 2-4 h |
Location | Exterior |
Maximum application temperature | 30°C |
Minimum application temperature | 5°C |
Number of pieces | 1 |
Product weight | 5000g |
Recoat time | 2-4 hours |
Setting time | 240min |
VOC details | 749g/L |
Volume | 4500ml |
Product code | 5060952080487 |