See more Sealants
Britannia Paints Block Paving Sealer Clear 20 litres - Protects & Enhances Patios & Pathways
Sold & shipped by Britannia Paints LTD
Available online only and not stocked in B&Q stores
£
105
£
21
per L
Checking availability...
Product details
Product information
Protects and enhances patios and pathways, repelling water, dirt and oil
Protects new or old concrete, block paving and recently cleaned paving
Acts as both a sealer and a joint stabliliser
Long lasting, clear acrylic based formula
Attractive mid-sheen finish
Coverage 5-7m2/ltr per coat depending on substrate
Solvent based clear acrylic sealer, protects and enhances new or old concrete, block paving or recently cleaned paving. Long lasting and ready to use, the sealer repels water, dirt and oils.
- Statutory guarantee
- Suitable for Stone
- > Surfaces should be clean, dry and free from oil, grease, dust, laitence and any other deleterious materials. > Ensure the paving surfaces to be treated are clean and free from any mould or fungal growth. > STIR WELL BEFORE USE. > Use as supplied without thinning down. > Do not apply in temperatures below 5 C or above 25 C and should not be subjected to extremes of temperature until completely dry. > The surface should be sectioned off to assist accurate coverage. Apply THIN uniform coats maintaining a wet edge but do not allow to puddle. > It is important to undertake a representative test area to ensure that the product is suitable for your requirements prior to commencement of the project and assessed for appearance, chemical resistance and wet & dry slip resistance. This is particularly important where the surface has previously been sealed. > Application should ideally be by an airless sprayer designed for solvent based products but application by brush or roller is also suitable. During application care should be taken to protect adjacent areas and equipment from overspray. > Under normal conditions it will be touch dry within 1 - 2 hours and may be lightly trafficked in 24 hours. > Rain will whiten the surface of the coating if not fully cured, so apply when there is no rain forecast for at least 12 hours.
- Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/protective clothing/eye protection/face protection/hearing protection. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. If skin irritation occurs: Get medical advice/attention. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
Features and benefits
- Protects New or Old Concrete, Block Paving & Recently Cleaned Paving
- Acts as Both a Sealer & a Joint Stabiliser
- Long Lasting, Clear Acrylic Based Formula
- Attractive Mid-Sheen Finish
Legal Information
- Warning. Contains: HYDROCARBONS, C9, Aromatics. Flammable liquid and vapour. Causes skin irritation. May cause respiratory irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects.
Specifications
Brand | Britannia Paints |
---|---|
Colour | Clear |
Container type | Bottle |
Curing time | 12h |
Location | Exterior |
Minimum touch dry time | 1h |
Paintable | Not paintable |
Product weight | 5000g |
Setting time | 180min |
VOC emissions class in indoor air | C |
VOC level | Very high |
Volume | 5000ml |
Product code | 5060952080746 |