Belle Cement Mixer Replacement Drive Belt - 900-99915-2

Features and benefits

Here is a troubleshooting guide to help fix a Belle Minimix 150 cement mixer that won't start or runs with low power:

1. Check the Power Source:

Ensure that the mixer is connected to a power source that is working.

Check the fuse and the socket outlet to make sure it is delivering power with a piece of equipment that is known to be working.

2. Check the Switch:

If the power source is working correctly, check the switch.

Look for any loose connections or signs of damage.

If the switch is damaged, broken or won't 'stay in', replace it.

3. Check the Capacitor:

If the switch is not the problem, then check the capacitor.

Look for any visible signs of damage or a buzzing sound.

If you notice any visible signs of damage to the capacitor, replace it.

4. Check the Fan:

Check for damage to the motor fan.

If the fan is damaged or missing fins it can cause the motor to overheat.

If the fan is damaged, replace it.

5. Check the Motor:

If the capacitor is not the issue, then the motor may be the problem.

Check the motor for any visible signs of damage, including broken wires or burnt-out parts.

If the motor is damaged, replace it.

6. Check the Wiring for Earth Faults:

Another common issue that can prevent the mixer from starting is an earth fault.

Check all wiring for any signs of damage or fraying. Test the circuit with a multimeter for earth faults.

If you notice any damage, replace the wiring.

By following these steps, you should be able to fix a Belle Minimix 150 cement mixer that won't start. However, if the problem persists, it is best to seek professional help from a qualified electrician.