2 x Angle Brackets 105 x 105 x 90mm Corner Metal L Plate HEAVY DUTY 2.5mm Steel for Wood Fence Timber Sleeper

2.5mm - Reinforced right angle bracket

Application: squares forced-through deep show very high flexural strength They are fitted with a wide range of perforating systems which enable them to be used in standard solutions as well as for custom-made joints. Material: DX51D + Z275 Thickness: 2,5mm; 3,0mm Fixing: Carpentry nails ANCHOR ø4; screws for timber ø6, ø10; bolts M10, M12; concrete anchors M10, M12.

Features & benefits

Heavy-duty Right Angle Brackets may be used for timber/timber, timber/steel and timber masonry connections

Structural

May be fixed with nails bolts or coach screws must be used in pairs

For multi-purpose fixing applications

Multi-purpose fixing of timber to timber at 90°

Manufactured from 2.5mm/2.0mm thick pre-galvanised mild steel

Reinforced angle brackets are suitable for structural applications in timber and steel framed structures.

Zinc coated sheet Z275:

Coat applied by immersing the object in melted zinc heated up to the temperature of about 450ºC. Obtained thickness of coating amounts to 80-90 ?m, no less than 60 ?m. Such a thick layer protection is recommended for products exposed to long-lasting influence of moisture, particularly for products to be used in a garden. Such coating may be covered with decorative paints suitable for galvanized (zinc-coated) surfaces.

Use:

Fastening of small trusses.

Cladding plates, cladding uprights.

Rafter anchors, cantilevers, headers, etc.

Norms:

ETA-16/0716

ETA-07/0277

Application

Material Mounting

Angle brackets with reinforcement are characterized by a very high bending strength. They have a wide range of well-thought-out nailing scheme, thanks to which they can be used both in standard solutions and selected for individually designed joints.

DX51D + Z275; DX51D + Z275 + black powder coating.

ANCHOR nails ø4; ANW – ANCHOR screws ø5 Torx20 socket; wood screws ø6, ø10; bolts M10, M12; concrete anchors M10, M12.