Variable Speed Floor Standing Pillar Drill - 650W Motor - 1630mm Height - 230V

Variable Speed Floor Standing Pillar Drill - 650W Motor - 1630mm Height - 230VOverview: Variable speed model allows stepless control of drilling speed between minimum and maximum enabling finer control of finish and tolerance. The belt transmission uses two spring tensioned cone pulleys, the diameters of which can be adjusted by moving a centre idle pulley with the speed adjustment control lever. Safety devices fitted include a no-volt release switch, allowing insurance company approval for use in educational establishments. Supplied with chuck guard. Mortise attachment available, order Features:

16mm(5/8") Capacity chuck No. 2MT.

Fitted with no-load voltage switch and locking cover to prevent accidental starting.

Height: 1630mm.

Spindle Centre to Column: 178mm.

Motor Power: 450W, Input Power: 650W.

Column Diameter: 80mm.

Spindle Travel: 80mm.

Weight: 71kg.

This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.

Specification:

Base Size - 460 x 275mm

Collar Diameter - Ø60mm

Column Diameter - Ø80mm

Drilling Capacity (Chuck Size) - 16mm

Maximum Distance Spindle to Base - 1170mm

Maximum Distance Spindle to Table - 730mm

Motor Power (Start) - 450W(650W)

Net Weight - 71kg

Number of Speeds - Variable

Optional Accessories - GDMX/KC - Keyless Pillar Drill Chuck 16mm

Overall Height - 1630mm

Speed Range - 150-2300rpm

Spindle Centre to Column - 178mm

Spindle Nose Taper - MT2

Spindle Travel - 80mm

Supply - 230V

Swing - 356mm

Working Base Surface Size - 200 x 220mm

Working Table Surface Size - Ø310mm

Further Information: We sell a wide variety of tools & workshop equipment for both the DIY and Professional markets. With well over 10,000 lines of equipment suiting all jobs big or small, our online store has it all. If you can’t quite find what you are looking for, please feel free to contact us and we’ll be more than happy to help.Alias: ys04490