Spudulica 4.5x100m Non Woven Geotextile Membrane 450m2 - Drainage, Landscape Fabric, Separation Layer, Stabilisation Layer

• Un roll where needed cut if required with sharp sissors or stanley blade and then secure down
• Not frost resistant
• Not UV resistant

Features and benefits

Non-woven geotextile is a heat bonded polyethylene fabric created for construction and DIY projects. It is an essential part of sub base layers in many projects decking, patios, pathways, shed bases, soakaway systems, French drains, drainage ditches, artificial turf.

Non-woven geotextile not only provides a strong separation and stabilisation layer to sub base layers it will also act as your drainage and filtration layer. This fabric membrane is designed to allow water to move through the fabric while leaving any sand/soil particles behind. This allows the fabric to keep water movement while maintaining sub base layers over time. This is an essential fabric in soakaway systems to stop crates becoming blocked with debris and failing.

It is definitely your number one choice for projects that involve water. Once installed the geotextile will not rot due to its design features. A good tensile strength and puncture resistance also means that this fabric can take a normal household loading i.e. 1-2 cars.

We can supply cut pieces boxed and folded up to full sized rolls, check out our selection. Any queries just ask.

• White Permeable Non Woven Membrane Fabric, versatile for Shed Bases, Artifical Grass, Soakaway Systems, French Drains
• Strong Non Woven Fabric - 100GSM
• Permeable - Allows Water through but not Soil Particles
• High Permeability - Water Flow is Continous
• Not ripped by hand - Please cut with a Stanley Blade or similar
• Heat bonded Fabric to create a Tough Membrane Suitable for Many Outdoor Projects
• 4.5 Width x 100M Length Full Roll Supplied
• Great for Drainage applications - Soakaways, Drainage pipes, Franch Drains, Drainage layers