Trend DG/JIG Sink Worktop Draining Groove Jig + 2.5mm Radius Flat Bottom Cutter

The Trend Draining Groove Jig is perfect for routing draining grooves in solid timber for Belfast type sinks. Made from 12mm hardwearing CNC machined phenolic. It provides a 0.5� fall with grooves at 50mm pitch and 455mm long. With sight marks for lining up and three removable sloping runners for support. There is also a cutter diameter check hole and fixing holes for user made stops for repetitious work.

CNC-Machined Compact Grade HPL provides precision, strength and durability.

3 Support Runners to minimise jig deflection and maximise router support.

8 Drainer Grooves at 50mm pitch and 455mm long.

Etched Sight Lines for quick setup.

In-Built 0.5� Fall to minimize setup time and remove the need for spacers.

Edge Guide Fixing Holes to accommodate user-made edge guides for repetitive installations.

Requires: �� router (min.1300W), cutter and 2 x F-Clamps.

Cutter included: C306X1/2TC (flat bottom).

Specification

Fall: 0.5�.

Groove Pitch: 50mm.

Groove Length: 455mm.

Slat Width: 19.8mm.