Stormdry MAX - Enhanced Waterproofing, Crack-Bridging and Anti-Graffiti Protection Barrier

• Guarantee - Statutory
• Store between 5 – 25°C in the original container
• Apply when rain is not forecast for the next 24 hours. Minimum application temperature is 5 oC and rising. Windows, door frames, glass surfaces,plants and other surfaces should be covered up before treatment, since the removal of silicone resin splashes after drying can be very difficult. Splashes should be removed as soon as possible using white spirit. Apply by brush or roller. Make sure a complete and even coat is applied. Use a brush to push the coating into any gaps, uneven surfaces and to clean up any drips. After application brushes and rollers should be cleaned immediately with white spirit. Stormdry MAX cures quickly once applied to dry substrates and when exposed to humidity in the air. It is dry to touch after 2 hours and tack free after 4 hours. Complete drying for heavier film builds may require up to 24 hours, leaving a slightly darkened look to the wall. If necessary Stormdry MAX can be re-coated.

Features and benefits

Waterproof, low-level flood-resistant gel silicone barrier. Can be used with Stormdry and Stormdry Repointing Additive No.2 as part of a flood defence design. Features superior crack-bridging up to 0.6mm in width.

• Waterproof, low-level flood-resistant gel silicone barrier. Can be used with Stormdry and Stormdry Repointing Additive No.2 as part of a flood defence design
• Superior crack-bridging up to 0.6mm in width. Stop moisture ingress and damage by filling medium-sized masonry and brick cracks
• Non-sacrificial anti-graffiti coating. Easily remove, marker pen, fly posters and stickers from non-adhesive coating. Simply wash with water to clean.
• Compatible with wide variety of substrates - masonry, stone, concrete, metals and painted surfaces. Apply by brush or roller in one coat
• Fully UV resistant for all types of external building surfaces