Expand the capabilities of your router with these handy add on accessories. The unibase makes any router compatible with Trend jigs, combined with the 7 function router base and 6 piece classic bit set you are covered for most projects.

Trend UNIBASE - Router base adaptor.

The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. Will fit directly to most routers.

Line-up pin used with a 16 mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base. Suits collet sizes 1/4inch, 8mm, 12 mm and 1/2inch.

Instructions for fitting

The line-up pin fit into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated in order to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10 mm up to 30 mm (GB10 - GB32). For larger diameter cutters a 40 mm guide bush (GB40) is available.

Ideal for hinge jig and lock jig

Diameter 170 mm

Thickness 8 mm

Bore 39 mm

Recess 60 mm

Screw thread 2BA

Trend CRB Combination Router Attachment

The Combination Router Base is a retro fit, quick change, multi-functional router base designed to:

Increase the overall versatility of the router.

Improve the quality of finish of every routing pass.

Reduce the possibility of error.

Increase stability during routing.

Increase the level of precision achieved.

Save set up time between tasks.

Save space on storing hand made jigs.

The CRB has seven functions - an offset baseplate, router compass from 19mm to 224mm radius, adjustable trenching with a clamp guide with 40mm micro adjustment, adjustable anti-tilt support, adjustable mortising of timber from 50mm to 200mm width, adjustable false panel groove copier and also enhances the Varijig frame system as an anti-tilt device whe