Stonecare4U - Grout Haze Cleaner (1L) - Suitable For Indoor And Outdoor, Resistant, Surfaces Such As Concrete, Porcelain etc

• Guarantee - 3 months
• Guarantee - 3 months

Features and benefits

Before use, remove any loose debris from the work surface and ensure you have adequate safety wear, i.e gloves, suitable protective eye-wear, face mask & clothing.

NOTE: Following the instructions below, perform a small test application in an inconspicuous area on-site prior to use. This will indicate the suitability and effectiveness of the product for your surface. If unsuitable for your requirements DO NOT PROCEED; contact us.

Dependent on the degree of contamination, Grout Haze Cleaner can be used neat or diluted up to 1:10 with water.

Pre-wet the surface, apply generously and allow the product to dwell for a few minutes before agitating and rinsing off with plenty of clean water.

Repeat the process if necessary, if using the cleaner indoors ensure good ventilation during and after use.

Important: Grout Haze Remover is not suitable for use with or around sensitive surfaces such as enamel, zinc, chrome, stainless steel, polished marble and limestone, etc.

• All surfaces must be resistant surfaces such as ceramic tiles, porcelain, brick, clay and quarry tiles, terracotta, concrete and other types of natural stones.
• Depending on contamination use Essential Grout Haze Cleaner neat or diluted up to 1:10 with water.
• Important: Grout Haze Remover is not suitable for use with or around sensitive surfaces such as enamel, zinc, chrome, stainless steel, polished marble and limestone, etc.