See more Cleaning products

Home

Right chevron

Home furnishings

Right chevron

Household cleaning

Right chevron

Cleaning products

Right chevron
Left chevron
icons.title_zoominicons.title_zoomouticons.title_zoomreset
Stonecare4U - Efflorescence Remover (5L) - Removes Salts & Efflorescence From Brickwork, Masonry & Other Resistant Surfaces
Right chevron

Stonecare4U - Efflorescence Remover (5L) - Removes Salts & Efflorescence From Brickwork, Masonry & Other Resistant Surfaces

Sold & shipped by Stonecare4U Ltd

Available online only and not stocked in B&Q stores

£
38.95
Loading
Checking availability...

Product details

Product information

    Stonecare4U Efflorescence and Salts Remover is a high-performance formula for cleaning all types of external masonry, brick, granite and other natural stone surfaces. Certainly, this powerful and fast-working formula is easy to use with a sponge, brush or sprayer. In short, it dissolves and acts as an efflorescence remover and cement mess from non-sensitive surfaces.


    Please Note: Efflorescence and Salts Remover is unsuitable for polished or finely honed stone surfaces which are sensitive, such as limestone, marble, manufactured stone, etc.


    COVERAGE:

    15m² to 30m² per litre.

    Coverage areas will vary depending on the extent of the contamination.


    KEEP OUT OF THE REACH OF CHILDREN

    • Guarantee - 6 months

    Features and benefits

      HOW TO APPLY:


      Remove any loose debris from the work surface before you start and ensure adequate safety wear, i.e. gloves, suitable protective eyewear, face mask and clothing.


      The product is to be used neat or diluted up to 1 to 5 with clean water: importantly, always perform a small test area to determine a suitable dilution rate and dwell time.


      First, wet the surface, then apply Efflorescence and Salts Remover, neat or diluted with water up to 1:5. The dilution rate will depend on the extent of the contamination.


      Immediately spread the product evenly onto the surface with a sponge, brush or sprayer. Leave to dwell for 10-15 minutes, scrub the surface, and then wash away with plenty of clean water.


      Above all, do not allow the product to dry on the surface.


      In cases of heavy contamination, it may be necessary to repeat this procedure.

      • Powerful and fast working formula.
      • DIY-friendly and easy to use.
      • Unsuitable for sensitive surfaces such as natural stone etc - In case of doubt, test the product in an inconspicuous area first to determine the suitability of the product.

      Specifications

      ConcentratedConcentrated
      Material stateLiquid
      Product weight5000g
      Product code5065006735559