Stonecare4U - All Stone Sealer Satin Finish (15L) - Eco Friendly, Highly Effective Wet Look Sealer for All Natural Stone

• Guarantee - 6 months

Features and benefits

First of all, remove any loose debris from the work surface and ensure you have adequate safety wear, i.e. gloves, suitable protective eyewear, face mask & clothing.

Leave the surface for a minimum of 72 hours with clear and dry weather to ensure the surface is completely dry and ready to be sealed. Make sure also that weather conditions are favourable before commencing. Application temperature range: 15° to 23°C.

Essential All Stone Sealer Satin Finish needs to be applied thinly and evenly with either a low-pressure sprayer, micro-fibre mop, paintbrush or soft cloth. In addition, take care not to leave application marks or allow the product to puddle on the surface. DO NOT DILUTE.

Next, allow 45-60 minutes drying time before applying the second coat, repeating the same process. Furthermore, an application hint is to apply the product in the opposite direction to help to achieve an even consistent finish. If necessary, more coats can be applied to achieve the desired “gloss” finish.

Please Note: Essential All Stone Sealer Satin Finish may change the colour/appearance of some surfaces, therefore, always try the product in an inconspicuous area prior to use. Surfaces that are not to be sealed should be protected with masking material.

Clean sealed areas with a mild, ph neutral cleaner or a very low concentration of our outdoor cleaner range. Do not use harsh or abrasive cleaning agents as this can have a negative effect on the treated surface. Not recommended for use on highly polished stone & ceramic glazed surfaces.

Coverage will vary depending on surface porosity. Average 4-6sq metres per litre on textured and riven surfaces. Up to 15sq metres per litre on smooth or honed surfaces.

*Please note this product is not suitable for Kandla Grey (mid & light grey) sandstone.

• Our formulation of All Stone Sealer with Satin finish is a high performance, high quality product intended mainly for use on quality internal and external natural stone surfaces.
• Provides a beautiful satin finish which is not only attractive but hard-wearing and works to intensify the natural colours of the stone. Apply more coats where you would like to achieve a glossy finish.
• The sealer also offers a high quality stain resistance against unsightly horrors like green growth, moss, algae, lichens and even oil spills.
• Average 4-6sq metres per litre on textured and riven surfaces. Up to 15sq metres per litre on smooth, honed or polished surfaces. Coverage will vary depending on surface porosity.
• *Please note this product is not suitable for Kandla Grey (mid & light grey) sandstone.