See more Valves

Home

Right chevron

Plumbing

Right chevron

Pipe fittings

Right chevron

Valves

Right chevron
Left chevron
icons.title_zoominicons.title_zoomouticons.title_zoomreset
FixTheBog™ Replacement for Ideal Standard SV01967 Dual Flush valve Seal and Clip
Right chevron

FixTheBog™ Replacement for Ideal Standard SV01967 Dual Flush valve Seal and Clip

Sold & shipped by FixTheBog

Available online only and not stocked in B&Q stores

£
5.71
Loading
Checking availability...

Product details

Product information

    HELP WITH DIAGNOSING FLUSH VALVE ISSUE

    If you have water running into the toilet pan continuously and are not sure if you need to purchase a spare part / replace the flush valve or inlet/fill valve you can try this simple test to determine.

    TEST: If you turn the water off (from the stop cock bringing water into the house OR an isolating valve on the cistern), leave it for up to an hour, does the cistern empty?

    If the cistern empties then the problem is with the flush valve seal or flush valve itself.

    If the cistern does not empty then it will be the inlet/fill valve that is faulty.

    • Manufacturer guarantee-1 year

    Features and benefits

      NOTE: Replacing the diaphragm may not always resolve your problem as the fault could be with the valve itself but it is a cheap way to try and resolve and is usually successful. We also recommend washing your valve in warm water to ensure any limescale or grit which could be causing an issue is eliminated.

      • Fits multiple Ideal Standard & Armitage Shanks flush valves including SV89067 SV92667 SV92467 SV93467
      • The Measurements shown are of the seal's original state, the seal can distort/perish/shrink dramatically over time, up to 1cm, so there is no point measuring old diaphragm.  Do not be concerned if you purchase this new item and it arrives and you think it is bigger than the old.
      • Listing is for quantity one flush valve seal and clip with FixTheBog instructions
      • Suits the SV range of flush valves by Ideal Standard and Armitage Shanks
      • Easily removed and replaced (fitting instruction supplied)
      • Ideal Standard have only ever manufactured one type of seal and clip, so if you have a seal and clip like this, then this listing will be the replacement you require.
      • Please note these are now a silicone/clear colour and not black
      • 70mm wide, 25mm hole Includes the fixing clip

      Specifications

      BrandFixTheBog
      Pack quantity1
      Product length8mm
      Product height12mm
      Water regulationsWRAS approved
      Product width12mm
      Product code5055639187979

      Documents