See more Wet room installation kits
Everbuild Aquaseal Tanking Kit Wet Room System Waterproofing Kit Large 7.5m
Sold & shipped by Buyaparcel
Available online only and not stocked in B&Q stores
Product details
Product information
The Aquaseal Wet Room System gives you everything you need to waterproof both walls and floors prior to tiling showers, wet rooms, wet zones and other areas susceptible to water and excessive moisture. Ideal for use on Plasterboard, MDF, Plywood, Cementitious Boards, Blockwork, Concrete and Specialist Wet Room Boards.
Included
Aquaseal Waterproof Tanking Primer (1L) For use before applying Tanking Membrane Tanking Tape.
Aquaseal Waterproof Tanking Membrane 5LTR Forms a permanently flexible watertight membrane, applied by brush, two coats.
Aquaseal Waterproof Tanking Tape 10MTR Self adhesive joint corner sealing tape. Easy to apply with pre-cut release liner.
Aquaseal Waterproof Tanking Drain Mat Self adhesive butyl backed fleece, capable of coping with movement around the drain outlet.
Aquaseal Wet Room System User Leaflet
Benefits
All components contained in 1 kit.
Single components also available.
Easy reference instructions on all components.
Areas for Use
For showers, wet rooms and wet zones in bathrooms
Use on all board joints, corners pipe entries.
Waterproofing prior to tiling.
For use on plasterboard, MDF, concrete, wet room boards, plywood etc.
Limitations
Do not use on timber or boards treated with spirit or stearate based coatings
Do not use in areas subject to high temperatures
It is the user s responsibility to determine suitability for use. If in doubt contact Technical Services
for advice.
Surface Preparation
All surfaces must be clean sound and dust free.
- Guarantee - Statutory
Features and benefits
Application STEP 1 WATERPROOF TANKING PRIMER A ready to use primer, applied by brush to all porous and semi porous surfaces in the areas that are to be waterproofed. It is quick drying and can be over coated after 1 hour. STEP 2 WATERPROOF TANKING TAPE A self-adhesive joint corner sealing butyl backed fleece tape that should be applied to all corner joints, board joints and pipe penetrations to provide a watertight seal that accommodates cross directional movement. The kit contains a 10 (5 for standard shower kit) metre roll which is usually sufficient to waterproof the corners in a 7.5 square metre application. STEP 3 WATERPROOF DRAIN MAT Self-adhesive butyl backed fleece capable of coping with board movement around the drain outlet, which is the area most susceptible to water leaks. STEP 4 WATERPROOF TANKING MEMBRANE A ready to use, liquid waterproofing compound which is applied in a 2 coat system by brush to provide a permanently flexible watertight membrane. Non-hazardous and solvent free. It is quick drying and tiling can commence after 12 hours. The tape can be over coated with Aquaseal Waterproof Tanking Membrane immediately after application. On internal corners ensure the tape overlaps on both sides to avoid a weak spot in the centre of the internal corner.
- Application
- Brand:Everbuild
- STEP 1 WATERPROOF TANKING PRIMER
- A ready to use primer, applied by brush to all porous and semi porous surfaces in the areas that are to
- be waterproofed. It is quick drying and can be over coated after 1 hour.
- Depth:315mm
- STEP 2 WATERPROOF TANKING TAPE
- A self-adhesive joint corner sealing butyl backed fleece tape that should be applied to all corner
Specifications
Pack quantity | 1 |
---|---|
Product weight | 1kg |
Product code | 5029347611149 |