Dryzone Anti Condensation Paint (1 Litre, White, Matt Finish) Thermal Paint that helps prevent mould and fungal growth

• Instructions for Use - Use a medium pile roller (recommended) to apply 2 coats evenly, taking care not to over-apply as this may result in a thick, stippled finish. A foam roller may give a smoother final finish or a brush can be used if preferred. Light sanding is permitted to remove any high spots, nibs or stipples. For best results Dryzone® Anti-Condensation Paint can be left as the final finish. Allow the first coat to dry fully before applying the second coat.

Features and benefits

• [Advanced Glass Microsphere Technology] Dryzone Anti-condensation Paint has been designed to reduce condensation by increasing the time-to-condensation by up to 3 times, allowing moisture to dissipate.
• [3-in-1 action] Moisture Buffering - Open-pore structure making it resistant to moisture and highly breathable.
• [3-in-1 action] Preservative Surface Effect discouraging mould and other biological growth associated with condensation from forming on the treated surface.
• [3-in-1 action] Thermal Effect - lower thermal conductivity and higher infra-red reflectivity creates a surface that is warm to the touch.
• Please ensure the paint is thoroughly stirred before use. Do not use mechanical mixing tools as this might damage the glass microspheres. Touch-dry after 1-3 hours depending on temperature, humidity and airflow. Coverage: Approximately 4 m² per litre (based on 2 coats).