WINNERWELL FLASHING KIT LARGE, TO FIT 3.5 INCH TRIPLE WALL CHIMNEY

Designed to fit perfectly with the Triple-wall Heat Protector Chimney 3.5″, the Winnerwell Flashing Kit Large is made from silicone which resists the temperature of 240℃ and is held in place by stainless steel rings with six wing nuts. This Flashing Kit Large can be used to create a weather-tight seal on existing stove jacks or when installing a stove jack in a tent or shelter.

WARNING: The Flashing Kit must be used with Triple-wall Heat Protector Chimney 3.5″. There is a risk of melting if installing the Flashing Kit on stove pipe directly.

Specification

Material: Silicone collar + AISI304 Stainless Steel rings

Inner Diameter: 150mm / 5.9in

Outer Diameter: 260mm / 10.2in

Height: 112mm / 4.4in

Net Weight: 0.6kg / 1.3lbs

Flashing Kit must be installed at the position below the 5th row of the holes of the Heat Protector Chimney. If there’s an installation angle, please must make sure that any position of the Silicone part of the Flashing Kit must below the 5th row of these holes as well. We recommend to purchase Winnerwell Short Pipes separately for height adjustment to meet the above specified position requirement.