Tetrion Professional 2K Wood Filler Natural Pine Fast Drying Drillable 1.2kg x3

Tetrion Woodfil Natural/Pine 1.2kg Can be sawn, drilled, screwed, sanded, planed, carved and painted Key Features: Fast setting-Starts to set in 5-10 minutes Resistant to water, seawater, oil, petrol, atmospheric chemicals and frost A new revolutionary vacuum process gives an airhole and pinhole-free super smooth finish. Use inside or out Product details : Tetrion Professional Woodfil- Super Smooth Finish* Drillable Screwable Sandable Planeable Carvable Paintable *Tetrion Woodfil with the new revolutionary vacuum process gives an airhole and pinhole-free super smooth finish. Tetrion Woodfil can be sawn, drilled, screwed, sanded, planed, carved and painted. FAST SETTING- Starts to set in 5-10 minutes. Can be sanded within 30 minutes and is ready for painting after 45 minutes at a normal room temperature. VERSATILE- Use inside or out for replacing decayed wood as well as for filling woodgrain, screw holes and cracks and joints in furniture, windows and door frames, etc. WEATHERPROOF- Resistant to water, seawater, oil, petrol, atmospheric chemicals and frost. Directions for use: Preparation- Surfaces must be dry, clean and free from oil, grease and loose material. Remove rotten wood and allow sound wood to dry before filling. Score smooth surfaces with an abrasive to provide a good key. Mixing- Mix the amount needed for requirements. Mix the wood filler in the following proportions, one part hardener (approx.. 5cm ribbon) with 50 parts Woodfil (approx..1 golf ball size). Mix thoroughly until no streaks remain and the colour is uniform. Application- Once the Woodfil and hardener have been mixed the useable life is approximately 5 minutes. Apply filler to job leaving slightly "proud" of the surface. When hard, sand down to the correct contour