See more Paint
Stonecare4U - Masonry Sealer (5L) - Protects Masonry & Brick Surfaces & Helps to Reduce Efflorescence, Green Growth & Algae
Sold & shipped by Stonecare4U Ltd
Available online only and not stocked in B&Q stores
Product details
Product information
Stonecare4U's Masonry Sealer is formulated with resins that seal and protect masonry surfaces whilst offering excellent water repellency and helping to reduce efflorescence, green growth and algae growth. It offers long-lasting protection and once sealed, the surface requires very little maintenance. It’s the quick and easy solution to sealing your masonry, blockwork and brickwork and it’s ready to apply straight from the bottle!
MAINTENANCE:
Sealed areas can be treated with mild, ph neutral cleaners or a very low concentration of our outdoor cleaner range. In short, please do not use harsh or abrasive cleaning agents as this can have a negative effect on the treated surface.
COVERAGE:
Apply undiluted, up to 15m² per litre per coat. Dependant on the porosity of the surface. Check the surface after application of the Essential Masonry Sealer to ensure the full effectiveness of the repellent.
- Guarantee - 6 months
Features and benefits
HOW TO APPLY:
Before use, remove any loose debris from the work surface and ensure you have adequate safety wear, i.e gloves, suitable protective eye-wear, FFP3 class mask & clothing. Application temperature: No less than 8°C.
Certainly, it’s important to perform a small test application in an inconspicuous area prior to use. This will indicate the suitability and effectiveness of the product for your surface.
Firstly, before applying the Masonry Sealer please make sure the surface is completely clean and dry. A low-pressure sprayer, roller, natural fibre brush or sponge to apply the product.
Next, apply one coat very generously to get as much sealer into the surface as possible.
Lastly, apply a second coat, before the first coat has dried to ensure complete coverage. Do not dilute. The surface should be dry after 45-60 minutes. Certainly, if rain is forecast or starts, then stop treatment immediately and cover the freshly impregnated areas. In other words, the surface is required to stay completely dry for the first 6 hours after application.
Please Note: Essential Masonry Sealer may delicately enhance the natural colour of the stone surface, therefore always try the product in an inconspicuous area prior to use. In the same vein, surfaces that are not to be sealed should be protected with masking material.
- Protects and seals masonry & brickwork.
- Helps to reduce growth of efflorescence, algae and more.
- Apply undiluted, up to 15m² per litre per coat. Dependant on the porosity of the surface.
Specifications
Application method | Brush, roller or spray |
---|---|
Base | Water-based |
Paint type | Sealer |
VOC level | No VOC level recorded |
Product code | 5065006735252 |